VAG KKL 409.1 VAG-COM 409.1 KKL Software Download VAG KKL 409.1 is China obd 409.1 KKL USB cable. VAG-COM 409.1 KKL have the functions of a factory VAG-1551 or VAG-1552 scan tool and more. Vag Com 409.1 Crack Instrukcjal ↔ DOWNLOAD VAG-COM Activation Instructions for Release 409.1. Dongle Interface users: If you buy any of our current interfaces software activation is not required! Vag Com 409.1 Crack Xaviersxmen's Hero Forum. Vag Com 409.1 Crack Vag Com 409.1 Crack, PictoColor iCorrect Portrait 2.0 97ffa81d91VCDS Lite 1.0 software VCDS crack version Here is a link to VAG-COM VCDS Lite 1.0 with Crack. You can use your Vag-Com 409.1 to. Xcar360 Automotive Technology.

(DO NOT connect cable to your computer yet. Only do this when you're instructed below.)

Start by downloading the VAG-COM Driver Pack 1.

Here's how to install on different Windows versions...

Windows Vista, 7, 8, 8.1, 10:

Uncompress the file. Double-click on 'Install.exe' to install the drivers. When complete — plug in cable into any USB port on your computer and wait for automatic installation to complete.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Windows XP:

1. Uncompress the file. Double-click on 'Install.exe' to install the drivers.
2. Plug cable into any computer's USB port.
3. 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?'. Select 'Yes'.
4. Select 'Install the software automatically'.
5. After the installation is complete, click 'Finish'.
6. 'Found New Hardware Wizard' will start once again because there are two drivers for this cable.
7. Go through the same steps as explained above to install this second driver.

If install is successful, move onto Step 2.

If installation fails, see below: Troubleshooting: If Drivers Failed To Install

Troubleshooting: If Drivers Failed To Install:

Installation failed? Download here VAG-COM Driver Pack 2.

Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this:

Then select the location where you unextracted Driver Pack 2. Let it install.

Go to Control Panel.

• Windows Vista/7/8/10: Control Panel » System » Device Manager
• Windows XP: Control Panel » System » 'Hardware' tab » Device Manager

Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number.

Vag Com 409.1 Crack Windows 10

If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Here's how...

Cable should be plugged into computer.

1. Start VCDS-Lite software.
2. Click 'Options' button.
3. You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
4. Click the ‘Test’ button.
5. If everything is good, it should display 'Interface Status: Found!'.
6. You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing!

If test is not successful — check the following:

1. Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.
2. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System.
3. Cable must be plugged into the vehicle with ignition ON.
4. Test the cable with each COM Port from 1 to 4 in Windows Device Manager.
5. Make sure that the driver is installed and configured as explained in Step 1.

• Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
• If VAG-COM 409.1 KKL cable doesn't connect — or if you get the error message 'Can't Synch Baud Rate' — then go to Options and set Start Baud to 9600. If 9600 doesn't work, try 4800 and 1200. Turn the vehicle's ignition OFF and back ON after each failed attempt to connect.
• If you have installed VCDS software before or from another source, uninstall all versions of VCDS software right now, and delete directory 'C:Ross-Tech'. Then install latest version of VCDS-Lite software by clicking here.

For further information and instructions for troubleshooting, visit the following links:

How to Install & Register VCDS-Lite software That Came With Your VAG-COM 409.1 KKL Cable

VAG KKL 409.1 VAG-COM 409.1 KKL Software Download

VAG KKL 409.1 is China obd 409.1 KKL USB cable. VAG-COM 409.1 KKL have the functions of a factory VAG-1551 or VAG-1552 scan tool and more. Need free download link for Vagcom 409.1 KKL USB Software?
USB KKL VAG-COM 409.1 KKL VAG 409.1 USB
Here is the free download link for you
VAG-COM 409.1 KKL Software http://yunpan.cn/QIJPsvfTw4cmV
Vagcom 409.1 KKL USB Driver　http://yunpan.cn/QIJPKZthQXAMb
VAG KKL 409.1 is fully compatible with almost all for VW/ for AUDI/ for SEAT/ for SKODA vehicles including those with KKL, but without CAN-BUS.

VAG-COM 409.1 KKL interface (adapter) is used as an interface and a USB cable to connect a for VW/ for AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).

Vagkkl Release 409 1 Driver

Welcome to join our Facebook group to get more free software download link and technician support

https://www.facebook.com/groups/vxdas/

Vag-com 409.1 + Crack Download Free